Swastik SW-9100-D1 Electronic Support

SwastikSew · 2024-11-20T14:23:55.084Z

to Reset the Machine 1.) Press and Hold the Upper and Lower Adjustment Button 2.) Press S button to Confirm, Shut Down and Restart User Parameters to enter user parameters 1.) After Swithching on the Machine 2.) Press P Button - to enter the parameter mode 3.) Press Upper and Lower button - to modify the parameter items 4.) Press S button - to enter 5.) Press Upper and Lower button - to modify parameter values 6.) Press S Button - to confirm and save User Parameters P01 Parameter Function: Maximum Speed Range: 010-500 Default: 450 Description: Set the maximum sewing speed (displayed number *10 = actual speed) P02 Parameter Function: Needle Stop Position Selection Range: 000-001 Default: 000 Description: Set the needle Stop Position (0: Needle Up, 1: Needle Down) P03 Parameter Function: Soft Start Switch Range: 000-001 Default: 000 Description: Soft Start Switch Setting (0: Off, 1: On) P04 Parameter Function: Soft Start Sewing Speed Range: 010 - 150 Default: 040 Description: Soft Start Sewing Speed Setting (displayed number *10 = actual speed) P05 Parameter Function: Stitches number of Soft Start Range: 001 - 099 Default: 004 Description: Set the Stitches Number of Soft Start, each unit is half stitch P06 Parameter Function: Miniumum Speed Range: 020-600 Default: 500 Description: Set the minimum speed (displayed number *10 = speed) Technician Parameters to enter technician parameters 1.) Before Swithching on the Machine 2.) Press and hold P Button - to enter the parameter mode 3.) Press Upper and Lower button - to modify the parameter items 4.) Press S button - to enter 5.) Press Upper and Lower button - to modify parameter values 6.) Press S Button - to confirm and save Technician Parameters P07 Parameter Function: Up Position Adjustment Range: 000-024 Default: 012 Description: P08 Parameter Function: Down Position Adjustment Range: 000-024 Default: 012 Description: P09 Parameter Function: Needle Goes Up Automatically as power turned on Range: 000-001 Default: 001 Description: 0: No Function 1: Power Turned On, Needle Goes Up Position Automatically P11 Parameter Function: Speed Curve Adjustment Range: 001 - 100 Default: 032 Description: The Lesser the value, the faster to increase the speed P15 Parameter Function: Stitch Correction Mode Range: 000-003 Default: 000 Description: 0: Half-Stitch 1: One-Stitch 2: Continuous Correct Half-Stitch Continuous correct stitch and quickly stop the machine P21 Parameter Function: Motor Rotate Direction Range: 000-001 Default: 000 Description: Motor Rotate Direction setting 0: clockwise 1: counter-clockwise P22 Parameter Function: Auto Running Speed Range: 020-500 Default: 350 Description: auto running speed setting (displayed number *10 = speed) P23 Parameter Function: auto running time Range: 010-250 Default: 020 Description: set the auto running time for testing P24 Parameter Function: auto running stop time Range: 010-250 Default: 020 Description: set the auto running stop time for testing P25 Parameter Function: Item A Test Range: 000-001 Default: 000 Description: Item A Test Setting (continue running with constant speed) P36 Parameter Function: Type Range: 000-010 Default: Description: Error Codes Error Code: E01 Problem: 1.) When Power On, detected main voltage too high 2.) When the supply voltage is too high Solution: Turn off the system power supply, and detect whether the supply voltage is correct (or exceed the rated voltage) If correct, please replace the control box and inform the factory Error Code: E07 Problem: 1.) Bad Connection at the motor connector 2.) Machine Locked or Object stuck in the motor pulley 3.) Sewing material is too thick 4.) Module outpupt is abnormal Solution: Please check the machine head to see if objects stuck in the motor pulley. If stuck it is not the machine head machinery fault. If normal running, please check the encoder connector and motor power cord connector if loose. If loose please tighten the connection If connection well, please check supply voltage whether abnormal or setting speed too high. If have please modify. If normal, Please replace the control box and notify the manufacturer Error Code: E09 / E11 Problem: Synchronizer signal error Solution: Turn off the system power supply, please check motor encoder connector if loose or fall off, renew to normal then restart system. If still not work, please replace the motor and notify the manufacturer. Error Code: E12 Problem: Power is turned on without the synchronizer signal Solution: Motor still can run, but it automatically starts the clutch mode. All constant-stitch sewing pattern and trimmer / wiper function is invalid. Please check the synchronizer. Error Code: E14 Problem: Encode Signal Error Solution: Turn off the system power supply, Please check motor encoder connector if loose or fall off, renew to normal then restart system. If still not work, please replace the motor and notify the manufacturer Error Code: E15 Problem: Power module abnormal over current protection Solution: Module driver output and head output will close all. Waiting for the power to open / reset. (Please carefully check power supply board each function) Error Code: E17 Problem: The Sewing table safety switch is not in the correct position Solution: Please check sewing table is open or not, the sewing table safety switch is damage or not, the socket is abnormal or not.

Swastik SW-9100-D1 Electronic Support

Upload Spare

Support

Machines

Accessories

Spares

Events

Blog

Downloads

Privacy Policy

Terms of Service

Refund Policy

Shipping Policy

Member Registration