Swastik SW-9100-D1

1.) Press and Hold the Upper and Lower Adjustment Button
2.) Press S button to Confirm, Shut Down and Restart

to enter user parameters

1.) After Swithching on the Machine
2.) Press P Button - to enter the parameter mode
3.) Press Upper and Lower button - to modify the parameter items
4.) Press S button - to enter
5.) Press Upper and Lower button - to modify parameter values
6.) Press S Button - to confirm and save

User Parameters

P01
Parameter Function: Maximum Speed
Range: 010-500
Default: 450
Description: Set the maximum sewing speed (displayed number *10 = actual speed)

P02
Parameter Function: Needle Stop Position Selection
Range: 000-001
Default: 000
Description: Set the needle Stop Position (0: Needle Up, 1: Needle Down)

P03
Parameter Function: Soft Start Switch
Range: 000-001
Default: 000
Description: Soft Start Switch Setting (0: Off, 1: On)

P04
Parameter Function: Soft Start Sewing Speed
Range: 010 - 150
Default: 040
Description: Soft Start Sewing Speed Setting (displayed number *10 = actual speed)

P05
Parameter Function: Stitches number of Soft Start
Range: 001 - 099
Default: 004
Description: Set the Stitches Number of Soft Start, each unit is half stitch

P06
Parameter Function: Miniumum Speed
Range: 020-600
Default: 500
Description: Set the minimum speed (displayed number *10 = speed)

to enter technician parameters

1.) Before Swithching on the Machine
2.) Press and hold P Button - to enter the parameter mode
3.) Press Upper and Lower button - to modify the parameter items
4.) Press S button - to enter
5.) Press Upper and Lower button - to modify parameter values
6.) Press S Button - to confirm and save

Technician Parameters

P07
Parameter Function: Up Position Adjustment
Range: 000-024
Default: 012
Description:

P08
Parameter Function: Down Position Adjustment
Range: 000-024
Default: 012
Description:

P09
Parameter Function: Needle Goes Up Automatically as power turned on
Range: 000-001
Default: 001
Description: 0: No Function
		 1: Power Turned On, Needle Goes Up Position Automatically

P11
Parameter Function: Speed Curve Adjustment
Range: 001 - 100
Default: 032
Description: The Lesser the value, the faster to increase the speed

P15
Parameter Function: Stitch Correction Mode
Range: 000-003
Default: 000
Description:
0: Half-Stitch
1: One-Stitch
2: Continuous Correct Half-Stitch
Continuous correct stitch and quickly stop the machine

P21
Parameter Function: Motor Rotate Direction
Range: 000-001
Default: 000
Description: Motor Rotate Direction setting
0: clockwise
1: counter-clockwise

P22
Parameter Function: Auto Running Speed
Range: 020-500
Default: 350
Description: auto running speed setting (displayed number *10 = speed)

P23
Parameter Function: auto running time
Range: 010-250
Default: 020
Description: set the auto running time for testing

P24
Parameter Function: auto running stop time
Range: 010-250
Default: 020
Description: set the auto running stop time for testing

P25
Parameter Function: Item A Test
Range: 000-001
Default: 000
Description: Item A Test Setting (continue running with constant speed)

P36
Parameter Function: Type
Range: 000-010
Default: 
Description:

Error Code: E01

Problem: 	1.) When Power On, detected main voltage too high
		2.) When the supply voltage is too high

Solution:
		Turn off the system power supply, and detect whether the supply voltage is correct (or exceed the rated voltage)
		If correct, please replace the control box and inform the factory

Error Code:	E07

Problem:	1.) Bad Connection at the motor connector
		2.) Machine Locked or Object stuck in the motor pulley
		3.) Sewing material is too thick
		4.) Module outpupt is abnormal

Solution:
		Please check the machine head to see if objects stuck in the motor pulley. If stuck it is not the machine head machinery fault.
		If normal running, please check the encoder connector and motor power cord connector if loose. If loose please tighten the connection
		If connection well, please check supply voltage whether abnormal or setting speed too high. If have please  modify. If normal, Please replace the control box and notify the manufacturer

Error Code: E09 / E11

Problem:	Synchronizer signal error

Solution:	Turn off the system power supply, please check motor encoder connector if loose or fall off, renew to normal then restart system. If still not work, please replace the motor and notify the manufacturer.

Error Code: E12

Problem:	Power is turned on without the synchronizer signal

Solution:	Motor still can run, but it automatically starts the clutch mode. All constant-stitch sewing pattern and trimmer / wiper function is invalid. Please check the synchronizer.

Error Code: E14

Problem:	Encode Signal Error

Solution:	Turn off the system power supply, Please check motor encoder connector if loose or fall off, renew to normal then restart system. If still not work, please replace the motor and notify the manufacturer

Error Code:	E15

Problem:	Power module abnormal over current protection

Solution:	Module driver output and head output will close all. Waiting for the power to open / reset. (Please carefully check power supply board each function)

Error Code: E17

Problem:	The Sewing table safety switch is not in the correct position

Solution:	Please check sewing table is open or not, the sewing table safety switch is damage or not, the socket is abnormal or not.