DSIMAN Servo Motor Parameter Modes
To Enter Parameter Mode:
Press "P" Button and "+" Button Together
To Save the changes in parameter mode:
Press "S" Button
P1 (advanced parameter)
Parameter Specifies: Sewing Speed Limit
Default: 4000 rpm
Range: 1000-7000 rpm
Step Size: 50
P2
Parameter Specifies: Motor Direction
Default: 0
Range: 0-1
Step Size: 1
P3
Parameter Specifies: Angle of down needle position
Default: 12
Range: 10-14
Step Size: 1
P4
Parameter Specifies: Start Speed
Default: 250 rpm
Range: 200-800 rpm
Step Size: 50
P5
Parameter Specifies: Accelerate Speed
Default: 3200 rpm
Range: 1200-4000 rpm
Step Size: 200
P6
Parameter Specifies: Automatic find the needle position
Default: 1
Range: 0-1 (1: Search)
Step Size: 1
P7
Parameter Specifies: Aging Speed
Default: 3700
Range: 1000-4500 rpm
Step Size: 50
P8
Parameter Specifies: Aging Running time
Default: 3000
Range: 500-5000ms
Step Size: 100
P9
Parameter Specifies: Aging Pause Time
Default: 2000
Range: 100-5000ms
Step Size: 100
P10
Parameter Specifies: Needle Position the parameter adjust
Default: 195
Range: 90-210
Step Size: 5
P11
Parameter Specifies: Foot Control (Electromagnet)
Default: 40
Range: 20-70
Step Size: 1
OR
Parameter Specifies: Foot Control (Pneumatic)
Default: 1
Range: 0-1 (1: Option)
Step Size: 1
P12
Parameter Specifies: Pressure foot down delay running
Default: 0
Range: 0-200 ms
Step Size: 20
P13
Parameter Specifies: Suction Option
Default: 1
Range: 0: No Suction
1: Long Suction
2-250 Needles: Suction Intervals
(Air Suction will be done once every set needle number during operation, and no air suction when the machine is shut down)
Step Size: 1
P14
Parameter Specifies: Interval suction maintenance time
Default: 1
Range: 1-5s (P13 is set to 2-250 when valid)
Step Size: 1
P15
Parameter Specifies: Number of Soft Start Stitches
Default: 0
Range: 0-15 ( 0: No Soft Start, 1 for Half Stitch, 2 for 1 Stitch, etc.,)
Step Size: 1
P16
Parameter Specifies: Number of Soft Start Stitches
Default: 400
Range: 200-1500 rpm
Step Size: 50
P17
Parameter Specifies: Reserved
Default: 0
Range: 0-1
Step Size: 1